You can divide the axes into sections by assigning gridlines to them. This allows you to get a better overview of the chart, especially if you are working with large charts. The Y axis major grid is activated by default.
グラフの軸には、目盛線を表示できます。 目盛線を表示すると、特に、グラフが大きい場合に、グラフ全体が見やすくなります。 Y 軸の主目盛線は、標準で表示されます。
|
To access this command...この機能の見つけ方 |
Defines the axis to be set as the major grid.
主目盛として設定される軸を定義します。
Adds gridlines to the X axis of the chart.
グラフの X 軸に主目盛線を表示します。
The Horizontal Grid On/Off icon on the Formatting bar toggles the visibility of the grid display for the X axis. Note: This only works if the Minor grid check boxes in Insert - Grids are cleared. Otherwise, the minor grid remains visible when the major grid is turned off.
書式設定 バーの 水平グリッドオン/オフ アイコンは、X 軸のグリッドの表示/非表示を切り替えます。注: このアイコンが機能するのは、X 軸の 補助目盛線 チェックボックスが 挿入 → グリッド で解除されている場合だけです。 それ以外の場合、主目盛をオフにしても、補助目盛は表示されたままになります。
Adds gridlines to the Y axis of the chart.
グラフの Y 軸に主目盛線を表示します。
The Vertical Grid On/Off icon on the Formatting bar toggles the visibility of the grid display for the Y axis. Note: This only works if the X-axis Minor grid is not selected in Insert - Grids. Otherwise, the minor grid remains visible when the major grid is turned off.
書式設定 バーの 目盛線(縦) オン/オフ アイコンは、Y 軸の目盛線の表示を切り替えます。注: これは、挿入 → グリッド で X 軸の マイナーグリッド チェックボックスが選択されていない場合にのみ機能します。 この項目を選択していると、主目盛線を表示していなくても、補助目盛線は表示され続けます。
Adds gridlines to the Z axis of the chart. This option is only available if you're working with 3D charts.
グラフの Z 軸に主目盛線を表示します。このオプションを使用できるのは、3D グラフの場合だけです。
Use this area to assign a minor grid for each axis. Assigning minor grids to the axis reduces the distance between the major grids.
この領域は、各軸の補助目盛を割り当てるために使用します。 補助目盛を軸に割り当てると、主目盛間の距離が縮小されます。
Adds gridlines that subdivide the X axis into smaller sections.
グラフの X 軸に補助目盛線を表示します。
Adds gridlines that subdivide the Y axis into smaller sections.
グラフの Y 軸に補助目盛線を表示します。
Adds gridlines that subdivide the Z axis into smaller sections. This option is only available if you're working with 3D charts.
グラフの Z 軸に補助目盛線を表示します。このオプションを使用できるのは、3D グラフの場合だけです。